I bought a T56 programmer yesterday and i have a problem with speed

Elarapy

Hello guys, I bought a T56 programmer yesterday and tried five emmc chips and noticed that the maximum reading or writing speed does not exceed 15 MB per second even though I use an EMMC socket version 2 with 8BIT settings and also with a frequency of 36, 40 and 50 MHz with 3.3v for vcc and vccq. What is the reason for this slowness?

Elarapy

These emmc chipsets were tested on Easy jtag Plus and were programmed at a speed of 24 MB per second, so I do not think there is a problem with them. Also, this is the version of the programmer, so what do you mean by version 2?

Elarapy

Thank you my friend for following
It is not possible to use an old version of the program because it is not possible T56 Firmware downgrade.

I have a lot of programmers, but I bought the T56 programmer because I trust it, as I worked on the old version of it years ago.
I have Superpro6100n, TNM5000, Proman, RT809H, Easyjtag Plus, T56
I know the advantages of each one, but I trust the T56. If the Admin follows up on user requests and adds a lot of functionality, the programmer will be in the lead.