Can T76 program Renesas R5F212DASNFP

Test

I have a T76 but can't find this chip in the list. Someone know how I can read/write it?

Thank you.

https://www.alldatasheet.com/datasheet-pdf/view/196282/RENESAS/R5F212DASNFP.html

Albano.Matos

I have a T76 but can't find this chip in the list. Someone know how I can read/write it?

Thank yo ...
Test 发表于 2025-4-30 10:49

   Hello,            As an user. The T76 programmer still, as i know, under development.  With latest software ver 12.89
still shows MCUs parts, Blue Print, not yet complete/available. Within Xgecu T76 app it shows:

下载 (149.38 KB)

2025-4-30 12:35

In the Xgecu site Haikou Xingong Electronic Co,Ltd    you may also find the project progress information.
As the information is sacarse, maybe because they are stressing to complete the project, put T76
programmer supporting all portfolio from T56 and T48, and the preview time to do it that already a bit
longer, we do not see Admin here, or updates showing that fast as users expected, but they show a good
speed in the ongoing work.

I'm updating the thread T76 programmer - 编程器使用与软件下载 - XGecu Programmer Forums - Powered by Discuz!
with the information about what i know or found. Feel free to write there, if you find something.

Software updates are in the page download software or data sheet about TL866 and ET7190 . You may also know
the update is available, in a warning flashing  (blue print in the picture  below), even if do not have the T76 connected to computer,
but connected to internet, if not, only downloading from the available sites. Of course, when you connect T76, may also appear
a warning message of an available firmware upgrade also needed for all features available at the time work the best possible way.
If you use an USB hub, do remember to have an external powered one, to avoid power supply problems to the unit T76.

下载 (82.61 KB)

2025-4-30 12:49

Hope it helps, or not :(

Test

I understand that the T76 is in development, but this chip is not on the T56 list either. So I think I'm realistic in saying that it won't be added tomorrow. Can the T76 have the material capacity to program it not be feasible? I really need to reprogram this chip and I wonder if it is possible to use another profile that might be compatible, or make a manual configuration or any other means would be welcome?

I found the Orange5 V850E2 programmer that can do it and if I have to do it I'm going to order it but I'd rather find a solution to do it with my T76.

Thank you.

Albano.Matos

I understand that the T76 is in development, but this chip is not on the T56 list either. So I think ...
Test 发表于 2025-5-1 06:16

Hello,
        My personal opinion is that T76 seems to be capable to do it , it only depend of
Dev. Team address it or not.
Also in the past, some MCUs requests , had answer NO here, for T56, from Admin,
present here in the clear, often, but not lately, then T76 appear....will see what's
happen.
I also think that the main goal at the moment, based in what i'm seeing, is they need
to address the still missing portfolio from T48 and T56 support ICs and bring them to
T76. At the very same time, also bring available adapters that allow support, offline,
of almost all ICs list, and or also the support through ICSP port, at least for those ICs
supported but do not have an adapter available/yet available, like yours's request ,
even they do in the open market for 48pin DIL .
I can also see some ICs that are, at the moment supported only on T76, like the PN27x
ICs, that need, based in the xgecu app info, a full populated pin  BGA24 adapter that i
never see, yet, for sale, ref: T76_B24_10-4x6. I still do not know, if that adapter can also
replace the older ones already available for T48, T56 and T76.
I also recommend you to send a message to the seller where bought the T76 unit, they
can also have the empowerment to help, at least to speedup things, hopefully. If you
do, and get any any positive result, please share with us, and post it here in the forum,
that may help other users in the process..
Like with screw drivers, for sure i can not get one do it all, i do have the need for several
different units, from several manufacturers, to address all my current needs. You have to decide your
path, because at the moment , for T76 software updates available in approx. 1 month, and for
T48/T56/TL8866 every 2 months.


Rgds

Test

Thanks Albano for your information.
Finally I purchased a Dataman 48Pro2 that support my MCU and also 136000 other chip.
I'll keep my T76 a look for future development.

Last question, there is a support forum for Xgecu in english or french?? Here, I'm unable to create a profil because all the Chinese make it very difficult to navigate or make search.

Albano.Matos

Thanks Albano for your information.
Finally I purchased a Dataman 48Pro2 that support my MCU and al ...
Test 发表于 2025-5-4 22:30

   Hello,            Nice to know that you find a way to continue to address your working needs.
As i know, it exist one or more Telegram channels, but i never been there,
because it can be also be, not English, French or even Chinese, but also maybe
Russian language speaking.

https://t.me/xgecu_t48_t56_tl866 I prefer to rely on my browser to translate to English, whatever language it's written. If anyone that reads the forum, know other place, please, post it here. Rgds