返回列表 发帖

New type of clock signal

Is it possible to introduce a second type of clock signal as shown in the picture?

Now there is only a signal type 010 ("C"), but adding a signal 101 ("K") would increase the possibilities of testing digital circuits.
C&K_clocks.jpg
TL866II  Clock Test.jpg

I would suggest considering 2 new signals: "U" - Up (01) and "D" - Down (10) ...

TOP

回复 2# admin


   It is about signals that change during other signals...
This is easier to understand when you work with digital signals...
New signals.jpg

TOP

Competitive companies know that it is worth being more flexible and you need to improve your products...

Here is a description of the signals for logic tests.

; Characters for testing vector are as follows:
;                               G...apply GND
;                               V...apply VCC
;                               X...Don't care
;                               0...input low level
;                               1...input high level
;                               C...input L-H-L puls
;                               K...input H-L-H puls
;                               L...expected output is low level
;                               H...expected output is high level
;                               Z...expected output is float

TOP

回复 6# admin

Just don't underestimate it and don't forget it. Please consider also other quite simple improvements in logic tests (eg clock signal "U" - up "01" and "D" - down "10" and other easy modifications to improve the editing of logical tests).
Your programmers, at least in logic tests, can become much better than the much more expensive competition, costing $ 500-1000.
I still have at least 30-40 new tests to do, which will further enrich the list of logic integrated circuits tested.

TOP

Thank you very much!

TOP

返回列表 回复 发帖