返回列表 发帖

New type of clock signal

Is it possible to introduce a second type of clock signal as shown in the picture?

Now there is only a signal type 010 ("C"), but adding a signal 101 ("K") would increase the possibilities of testing digital circuits.

C&K_clocks.jpg (64.63 KB)

C&K_clocks.jpg

TL866II Clock Test.jpg (85.98 KB)

TL866II  Clock Test.jpg

Thank you very much!

TOP

回复 7# yovish

   You are right, we will improve it in the future

TOP

回复 6# admin

Just don't underestimate it and don't forget it. Please consider also other quite simple improvements in logic tests (eg clock signal "U" - up "01" and "D" - down "10" and other easy modifications to improve the editing of logical tests).
Your programmers, at least in logic tests, can become much better than the much more expensive competition, costing $ 500-1000.
I still have at least 30-40 new tests to do, which will further enrich the list of logic integrated circuits tested.

TOP

回复 5# yovish

Later, when we have time, we will add this function .
Temporary method: 3-items vector table 1 - 0 - 1

TOP

Competitive companies know that it is worth being more flexible and you need to improve your products...

Here is a description of the signals for logic tests.

; Characters for testing vector are as follows:
;                               G...apply GND
;                               V...apply VCC
;                               X...Don't care
;                               0...input low level
;                               1...input high level
;                               C...input L-H-L puls
;                               K...input H-L-H puls
;                               L...expected output is low level
;                               H...expected output is high level
;                               Z...expected output is float

TOP

回复 2# admin


   It is about signals that change during other signals...
This is easier to understand when you work with digital signals...

New signals.jpg (20.99 KB)

New signals.jpg

TOP

I would suggest considering 2 new signals: "U" - Up (01) and "D" - Down (10) ...

TOP

1. set CLK PIN to 1
2 set CLK PIN to 0

3 set CLK PIN to 1   

TOP

返回列表 回复 发帖