V13.03A for T76- Software and IC support List are here xgecu..
(Newer 'A' setup file seen for download, maybe corrected any install error)
1. The number of supported chips has been increased to 39,009, with over 250 chips added. This primarily includes support for Micron's MT35XUxxx and MT35XLxxx series Octal chips. Read speeds reach 60+ MB/s.
2. Automatic serial number increment for T76 has been implemented.
3. Support for multi-machine programming has been implemented (up to four programmers can be connected to one computer simultaneously).
4. The software interface now automatically adapts to high-DPI monitors.
5. Multiple software optimizations have been made to ensure greater stability.
V13.06 for TL866II, T48, and T56- Lists and software are here xgecu.
1. SD card and SD NAND algorithm optimization, greatly enhancing SD compatibility.
2. Increased logic testing for the 74 series.
3. Fixed some known defects.
4. Added support for some chips.
Supported Chips:
TL866II-.19353 from 19336 from 19326 from 19272 from 19023 from 18991
T48-----.36029 from 35993 from 35969 from 35779 from 35267 from 35138
T56-----.38850 from 38811 from 38783 from 38537 from 38062 from 37906
T76-----.39009 from 38649 from 38540 from 38319 from 36111 from 35186
Good News again, T76 only software version is out.
12.93
1. When NAND enables internal ...
Albano.Matos 发表于 2025-5-14 20:02
Good News, new T76 only software version is out. Now support 38540 ICs, list and software is here xgecu
12.95
1. Added SRAM test function completed
2. Comprehensively optimized SPI NORFLASH / SPI NAND FLASH burning algorithm.
3. Added support for SPI Octal 25 series 8-wire chip programming, with a maximum speed of 60MB/s (Octal dedicated burning seat SOP16/full-pin BGA24 required)
4. Added support for 220+ chips
5. Added 3 WSON8/SOP16/BGA24 dedicated burning seats supporting 25 chips, extremely high speed/extremely high reliability, and redefined the ISP port of 25 chips
6. Fixed some known BUGs
Hello ,
Good news, new updates available:
TL866II-.19272 from 19023 from 18991
T48--- ...
Albano.Matos 发表于 2025-5-8 13:54
Good News again, T76 only software version is out. xgecu
12.93
1. When NAND enables internal ECC, the error bit is set to 0, bit flipping is not allowed, and the user is prompted whether to turn on or off the internal ECC when copying the chip
2. EMMC clock phase fine-tuning to solve the compatibility problem of individual chip models at 160MHZ.
3. Flash back problem when programming is forced to terminate
Hello, Unfortunately not yet. The best i found are the new Ic support
lists, you can downl ...
Albano.Matos 发表于 2025-4-18 11:46
Hello ,
Good news, new updates available:
TL866II-.19272 from 19023 from 18991
T48-----.35779 from 35267 from 35138
T56-----.38537 from 38062 from 37906
T76-----.38319 from 36111 from 35186 ( IC support lists available at xgecu )
.
Latest translated changes:
.
T76: 12.91.
12.91
1. The number of chips supported has been increased to 38,319, including MICROCHIP PIC microcontrollers, etc., more than 2,000 chips
2. The EMMC ISP clock has been increased to 80MHZ, and the dedicated ISP line is adapted. The transmission speed of 4B mode reaches 38MB/s, and 1B mode reaches 9MB/s, which is close to the speed of other models of programmers on the adapter.
3. The software has been optimized in many places to make the work more stable
12.89
1. The number of supported chips has been increased to 36111, including PAL programmable logic chips/ATMEL microcontrollers and other chips
2. EMMC has been further optimized, and the last empty data is truncated when reading files, which can save a lot of hard disk space
3. Fixed known BUGs
12.85
1. The number of chips supported has been increased to 35816
2. Hundreds of special FLASH chips have been added, and SSOP56 0.8mm chips have been added
3. Known BUGs have been fixed
T48-56-TL866II-12.90
12.90-12.88
1. Chip support quantity:
T56: 38537
TL866II: 19272
T48: 35779
2. Added support for hundreds of new chip models.
12.78
T56 programmer:
Support: 37906 (+150)
T48 programmer:
Support: 35138 (+142)
TL866II programmer:
Support: 18991 (+75)
2. Optimize EMMC file analysis function
3. Fix known defects
FM28V020, 8582 fix
ATMEGA8A EEPROM Erase fix
AT89S8252 fix M28F102 PLCC44 fix
12.67
T56 programmer:
Support: 37756 (+105)
T48 programmer:
Support: 34996 (+86)
TL866II programmer:
Support: 18916 (+26)
2. Newly added:
ZB25Qxxx
XM25RU128C
PY25F512LC PY25Q01GLC PY25D16HB
D27C011
and other chips
3. Fixed known defects
TMS27C240 fixed
AK6440AM AF fixed
Fixed other known bugs
12.66
Version: V12.66 2024.2.5
T56 programmer:
Support: 37651 (+158)
T48 programmer:
Support: 34910 (+120)
TL866II programmer:
Support: 18890 (+65)
2. Added: SPI series 1.2V chip (T56)
W25Q12NE P25QxxSLE GD25UF64E/128E
and other chips
3. Fixed known defects
I'll update this as soon a new information available.
Thank you for the info.
I've noticed that communication here has become very scarce.
We're not asking for much, but the minimum should be there.
I've been involved since the first model, and there's a lot of potential in the project.
I would be very sorry if it were to fail now due to a lack of communication.
Let's hope things get better.
Hello, The support for testing SRAM ICs , still in blue print for T76, Haikou Xingong Electronic Co,Ltd and that means that the support is not complete yet, nor full implemented. I've noticed that it also appears for T56, T48, and TL866II and i suspect also applies.... :(
Today noticed software version 12.85 is out for T76. The sram Ics presented in the previous list have been removed.
As SRAM icon in the bar at top still shadow, and 'blue print' list not updated yet, we have to wait a bit more :(
T76 ICs Support list is published now at the same page of software.
Y cual seria una pagina de un proveedor alternativo?
And what would be an alternative provider' ...
Gabo 发表于 2025-1-8 21:26
Hola Gabo, Utiliza tu navegador para traducir idiomas que no entiendes. El enlace al proveedor alternativo está en el mensaje, simplemente cópielo en la barra de direcciones. Para mí, puedes escribir en el idioma que quieras.
Where are the updates?
Oleg_Skalskiy 发表于 2025-1-3 22:33
Hello No updates from a certain date, now all focus is on T76. But you can download
the updates from other vendor site, only updates for certain bugs....
I think updates will resume shortly, hopefully...
It has been
more than 6
months
since the last
update.Previously, updates were released more often. I would like
to
see a new
version
with a lot
of
new
chips
and
new
features.
