Hello,
I recently purchased a t48 but I'm having error on programming a lattice 16v8-25qp.
Reading and eraising are working fine and I'm connected with the original cable directly to my laptop usb.
This is the log:
APP Version : 12.63 Model : T48
Device : GAL16V8
Pins Detected Passed!
Erase Chip....Timer : 828ms
Programing Fuse Bits completed ....Timer :3375 ms
Verify Error! FUSE bit:0 Buff_val: 1 IC_val: 0
Programming Stopped!
Thanks |
