Hi. I'm from Poland. A few days ago on Aliexpres I bought a new XGecu T56 programmer. I have a probl ...
Tadeusz_B 发表于 2023-2-22 06:11 
Hello, As a user.... As i know, jumpering pins as stated can recover the programmer from an incomplete flash,
as it will ( maybe) be recognized but not functional, and reflash option did not become available after Xgecu
software start, or if flash fail in early stages, and programmer isn't recognized at all, leds always on,
(if no hardware failure) it will be recognized and allow reflash to latest level within xgecu software.Normal Leds start sequence is 'Run' blinks a little and turn off, only 'power' stays on, starting xgecu software it will blink 'Run' briefly,
blink more often, when doing communication with programmer, or work with eprom in socket.
If you need permission to do it, wait, please, for ADMIN answer of ask the seller.
Latest firmware from Xgecu 12.50 , in my case, is now at version 1.68.
Hope not confused you.
Best Regards |
