XGecu Programmer Forums - Powered by Discuz! Board

标题: klm4g1fete.b041 emmc [打印本页]

作者: fga 时间: 2023-1-4 00:29 标题: klm4g1fete.b041 emmc

Não lê nem escreve, sempre dá erro,
segue as fotos

图片附件: [foto] IMG_20230103_155307 (Large).jpg (2023-1-4 00:08, 366.31 KB) / 下载次数 18662
http://forums.xgecu.com/attachment.php?aid=1672&k=3718195740fecbd143e2de9de888ebb8&t=1773227960&sid=SWio22

图片附件: [foto] IMG_20230103_155421 (Large).jpg (2023-1-4 00:08, 467.31 KB) / 下载次数 19814
http://forums.xgecu.com/attachment.php?aid=1673&k=553331bc5f48a1bb710895bb03177d43&t=1773227960&sid=SWio22

作者: fga 时间: 2023-1-4 00:31

It does not read or write, it always gives an error,
follow the photos
fga Publicado em 04/01/2023 00:29

[/quote]

作者: admin 时间: 2023-1-4 08:44

回复 2# fga

If it cannot be read normally, try switching the VCC/VIO voltage and clock frequency.

作者: fga 时间: 2023-1-4 18:59

I already performed the test, it was the same, it always gives an error

作者: fga 时间: 2023-1-5 01:32

problem solved

图片附件: IMG_20230104_171904 (Large).jpg (2023-1-5 01:32, 416.58 KB) / 下载次数 19607
http://forums.xgecu.com/attachment.php?aid=1676&k=d2cb396157764c99b4cfc4f51dc70780&t=1773227960&sid=SWio22

图片附件: IMG_20230104_171916 (Large).jpg (2023-1-5 01:32, 357.77 KB) / 下载次数 18771
http://forums.xgecu.com/attachment.php?aid=1677&k=a0caaed7653a5b1abebe5e8260e2abc3&t=1773227960&sid=SWio22

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)