XGecu Programmer Forums - Powered by Discuz! Board

标题: Nand Flash Edit Buffer MX30LF1G18AC [打印本页]

作者: fabiod 时间: 2020-9-15 16:13 标题: Nand Flash Edit Buffer MX30LF1G18AC

Hi,
I read Nand Flash MX30LF1G18AC in the default file
Flash_data.bin
then I want to Edit Buffer for changing one or more words...like in picture

but when I save the new file modified...
this is the result...

the size is only 133kb and I can't use this file
for programming the New IC Blank Nand Flash...

How Can I resolve this?
Thanks

图片附件: 1.jpg (2020-9-15 16:09, 429.57 KB) / 下载次数 11766
http://forums.xgecu.com/attachment.php?aid=165&k=34de5b47d06b4d003689cfd75a69abc1&t=1777520736&sid=ZalA0c

图片附件: 2.jpg (2020-9-15 16:11, 118.57 KB) / 下载次数 10238
http://forums.xgecu.com/attachment.php?aid=166&k=e730514e5e76bc4c7cb4867fa46d4fb2&t=1777520736&sid=ZalA0c

作者: fabiod 时间: 2020-9-16 20:57

I solved it...I opened file with hex editor...then I modified bin file...
and I saved the new file...
then I loaded file in the XGECU software...
and it works perfectly....

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)