XGecu Programmer Forums - Powered by Discuz! Board

标题: Probleme with emmc with vccq =1,8v cant detect with supp or isp. [打印本页]

作者: tahar191 时间: 2020-7-29 22:59 标题: Probleme with emmc with vccq =1,8v cant detect with supp or isp.

Hi, problem with emmc have vccq - 1.8v, can not detect, it gave me the initial emmc and failed - error: 00FF8081, when I use an external 1.8v, it tries to read the information, read cid csd successfully but error to read ecsd and failed - no data response state: I tried to measure vccq either in isp or on the emmc support , it is either absent or it is of low value -max 1.4v-.

图片附件: 2020-07-28_17-22-26.png (2020-7-29 23:18, 91.65 KB) / 下载次数 18642
http://forums.xgecu.com/attachment.php?aid=128&k=37d9949a0d410f4e77a7d92b930e85c5&t=1777726918&sid=m2Ddj8

图片附件: 2020-07-28_17-26-16.png (2020-7-29 23:18, 92.78 KB) / 下载次数 18648
http://forums.xgecu.com/attachment.php?aid=129&k=26e67ee6e1eeafc2c4ad20c49c541272&t=1777726918&sid=m2Ddj8

图片附件: 2020-07-28_19-02-22.png (2020-7-29 23:20, 115.24 KB) / 下载次数 18516
http://forums.xgecu.com/attachment.php?aid=130&k=c5d899df122a5ab5f53b7ba6ea2366e0&t=1777726918&sid=m2Ddj8

作者: admin 时间: 2020-7-30 13:03

Maybe it's your adapter problem. 1.8V is powered by U4 LDO XC6206-1.8V on EMMC adapter.

check IC :XC6206-1.8V

when choice VCC3.3/VCCQ1.8V . programmer's VCCQ PINS(2# 3# of P2) is Is high resistance state.and 1.8V power by XC6206.

if choice VCC3.3/VCCQ3.3V VCC and VCCQ powered by programmer.

this is EMMC adapter SCH.

图片附件: EMMC_Sch.jpg (2020-7-30 13:21, 137.23 KB) / 下载次数 18878
http://forums.xgecu.com/attachment.php?aid=131&k=f50e9834eea7ae5b0d5fa985478ad33f&t=1777726918&sid=m2Ddj8

作者: tahar191 时间: 2020-7-30 22:48

think you , problem resolu 👍👍👍👍👍 after checking ic6202 , all ok reading and programming .

图片附件: photo_2020-07-30_16-35-05.jpg (2020-7-30 22:33, 203.87 KB) / 下载次数 19253
http://forums.xgecu.com/attachment.php?aid=132&k=a26d0734223d1bb0c456e0a178b07c83&t=1777726918&sid=m2Ddj8

图片附件: photo_2020-07-30_16-35-57.jpg (2020-7-30 22:33, 168.59 KB) / 下载次数 18982
http://forums.xgecu.com/attachment.php?aid=133&k=da0215082f8155ed0a160c1753908c8f&t=1777726918&sid=m2Ddj8

图片附件: photo_2020-07-30_16-36-01.jpg (2020-7-30 22:34, 169.15 KB) / 下载次数 18977
http://forums.xgecu.com/attachment.php?aid=134&k=b5be751d9620a56bb0aacb626b805073&t=1777726918&sid=m2Ddj8

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)