XGecu Programmer Forums - Powered by Discuz! Board

标题: ATMLH428 - What IC setting should I use? [打印本页]

作者: Test 时间: 2020-5-20 22:22 标题: ATMLH428 - What IC setting should I use?

Very sorry for the bad format. I have ATMLH428 chip. It may be same as AT24C08C, but I am not sure. What IC setting should be used?

图片附件: IMG_20200515_112405.jpg (2020-5-20 22:04, 170.83 KB) / 下载次数 23719
http://forums.xgecu.com/attachment.php?aid=99&k=ff6c8a5c6b4fb3aa23567eb89a709cd9&t=1772560685&sid=szKBSf

图片附件: IMG_20200515_112405.jpg (2020-5-20 22:05, 170.83 KB) / 下载次数 26740
http://forums.xgecu.com/attachment.php?aid=100&k=67fc04b461e511c6a0ba63454ea4a744&t=1772560685&sid=szKBSf

图片附件: IMG_20200515_112405.jpg (2020-5-20 22:07, 170.83 KB) / 下载次数 26711
http://forums.xgecu.com/attachment.php?aid=101&k=e39837f74ff5efc201305334d50994ef&t=1772560685&sid=szKBSf

作者: admin 时间: 2020-5-21 11:46

Sorr.I don't know.

作者: Steve007iii 时间: 2021-8-14 05:31

Very sorry for the bad format. I have ATMLH428 chip. It may be same as AT24C08C, but I am not sure ...
Test 发表于 2020-5-20 22:22

Sorr.I don't know.
admin 发表于 2020-5-21 11:46

Atmel encoding is usually unfinished shit

AT24C08C pdf

it is 24C08I think that
Abdulkerim 发表于 2020-10-26 06:53

it should be the version

作者: admin 时间: 2021-8-14 08:17

回复 4# Steve007iii

Yes, this is a AT24C08

图片附件: 24C08MARK.png (2021-8-14 08:17, 116.96 KB) / 下载次数 22760
http://forums.xgecu.com/attachment.php?aid=879&k=ab07dbc2d1d4fd6500cfc19d61c09c9d&t=1772560685&sid=szKBSf

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)