标题:
atmega328p isuue
[打印本页]
作者:
safak
时间:
2021-11-20 13:54
标题:
atmega328p isuue
i am getting error like this programming atmega328p via tl866ii
APP Version : 11.60 Model : TL866II Plus
Device : ATMEGA328P @DIP28
Pins Detected Passed!
ID: 0x 1E 95 0F ......OK!
Erase ...Succeeded. Time : 0.046 S
Programming FLASH ...Succeeded. Time : 2266ms
Verifying FLASH ...Succeeded. Time : 828ms
Programming EEPROM ...Succeeded. Time : 422ms
Verifying EEPROM ...Succeeded. Time : 47ms
Programming Config ...Succeeded. Time : 0ms
Verifying Config ...Succeeded. Time : 63ms
Programming Lock bits............Elapsed time: 0ms
Programming ...Failed
what could be the problem?
作者:
admin
时间:
2021-11-22 08:03
回复
1#
safak
This is a bug when verifiying lock bit, replace it in the V11.60 installation floder.
After unzipping, replace it]
Xgpro.rar
(1.12 MB)
下载次数: 16400
2021-11-22 08:02
附件:
Xgpro.rar
(2021-11-22 08:02, 1.12 MB) / 下载次数 16400
http://forums.xgecu.com/attachment.php?aid=1019&k=19542299c1a8bbb0fb6c3b6aa9878064&t=1714555545&sid=p31u5U
作者:
safak
时间:
2021-11-23 14:08
回复
2#
admin
the bug fixed. thank you very very much.
欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)
Powered by Discuz! 7.2
Xgpro.rar (1.12 MB)
附件: Xgpro.rar (2021-11-22 08:02, 1.12 MB) / 下载次数 16400