Board logo

标题: Bad blocks after programmed firmware F59L1G81MA and F59L1G81LB [打印本页]

作者: ghostpvv    时间: 2021-8-25 23:33     标题: Bad blocks after programmed firmware F59L1G81MA and F59L1G81LB

The chip F59L1G81MA and F59L1G81LB is programmed and verifyed without errors.
But when doing check "NAND Bad Block Check" - there are always present bad blocks.

After cleaning "Erase", checking "Blank check" and "NAND Bad Block Check" - there are no bad blocks.

I tried different firmware and several chips F59L1G81MA/F59L1G81LB (there are no errors on the chips).

Adapter NAND08 modified.

Is there a bug in the programmer software for this chip?

Programmer: XGecu TL866II Plus

Update:

The problem was solved by choice:

Spare Area in the File: none

1 Device = (2048+64)*64 = 135168




欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/) Powered by Discuz! 7.2