XGecu Programmer Forums - Powered by Discuz! Board

标题: New Logic Test - 7491 Vector Table [打印本页]

作者: yovish 时间: 2021-4-28 01:15 标题: New Logic Test - 7491 Vector Table

Enclosed is the new layout to be added to the logic tests.
The test was performed on the M74LS91P (shift register 8-bit) chip from Mitsubishi.

图片附件: 7491 - Logic Vector.jpg (2021-4-28 01:14, 447.79 KB) / 下载次数 26170
http://forums.xgecu.com/attachment.php?aid=468&k=80ba9af1aaaf2ae92f568a6552bee132&t=1789764625&sid=ypS2m8

图片附件: 7491 - Logic Test.jpg (2021-4-28 01:14, 310.65 KB) / 下载次数 24299
http://forums.xgecu.com/attachment.php?aid=469&k=8152d5be8a34a418b575c72b57bb730f&t=1789764625&sid=ypS2m8

图片附件: M74LS91P.jpg (2021-4-28 01:14, 243.38 KB) / 下载次数 23544
http://forums.xgecu.com/attachment.php?aid=470&k=87067c74534995423390790ccaad99a0&t=1789764625&sid=ypS2m8

附件: 74LS91.pdf (2021-4-28 01:15, 220.01 KB) / 下载次数 16700
http://forums.xgecu.com/attachment.php?aid=471&k=6145eacc5607735b2e1b5b49bc1ccf69&t=1789764625&sid=ypS2m8

附件: 7491.lgc (2021-4-28 01:15, 2.62 KB) / 下载次数 111303
http://forums.xgecu.com/attachment.php?aid=472&k=bd8a8a99475dc71d398d57667b58e833&t=1789764625&sid=ypS2m8

作者: yovish 时间: 2021-5-26 19:45

I am giving the correct version of the tests for the 7491 chip. The previous version is wrong.

An interesting fact is that this IC cannot be recognized automatically (Auto Find), possibly because the first few lines of the logic vector do not validate any logical values.

图片附件: 7491 - Logic Vector.jpg (2021-5-26 19:44, 381.95 KB) / 下载次数 24808
http://forums.xgecu.com/attachment.php?aid=613&k=2ef7bda6ace9e7fdb8229430786392df&t=1789764625&sid=ypS2m8

图片附件: 7491 - Logic Test.jpg (2021-5-26 19:44, 308.97 KB) / 下载次数 24148
http://forums.xgecu.com/attachment.php?aid=614&k=c852cf523fd56b4b3eb6b1597908dce1&t=1789764625&sid=ypS2m8

附件: 7491.lgc (2021-5-26 19:45, 14.06 KB) / 下载次数 111087
http://forums.xgecu.com/attachment.php?aid=615&k=a6312bd73e1935f9ee226fd1bc783e2e&t=1789764625&sid=ypS2m8

作者: admin 时间: 2021-7-16 08:11

回复 2# yovish

this is a bad logic file

作者: yovish 时间: 2021-7-17 03:26

I put a freshly generated LGC file.

附件: 7491.lgc (2021-7-17 03:26, 2.62 KB) / 下载次数 99028
http://forums.xgecu.com/attachment.php?aid=740&k=8e9cbb9398562276be1e073304172674&t=1789764625&sid=ypS2m8

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)