XGecu Programmer Forums - Powered by Discuz! Board

标题: New Logic Test - 7454 Vector Table [打印本页]

作者: yovish 时间: 2021-4-3 03:59 标题: New Logic Test - 7454 Vector Table

Enclosed is the new layout to be added to the logic tests.
Logic test done with the modified DM74LS54N (National Semiconductor) connection to the programmer (connection drawing attached).

WARNING!
The 7454 and 74LS54 integrated circuits differ internally.

图片附件: 7454 - Logic Vector.jpg (2021-4-3 03:57, 290.76 KB) / 下载次数 20265
http://forums.xgecu.com/attachment.php?aid=338&k=a31be66acb4dbc6954906dd9a8fa8f1a&t=1773278199&sid=gIUGIg

图片附件: 7454 - Logic Test.jpg (2021-4-3 03:57, 255.04 KB) / 下载次数 19764
http://forums.xgecu.com/attachment.php?aid=339&k=9e91fdb54e1353087754398e9a6577bb&t=1773278199&sid=gIUGIg

图片附件: 7454 - State Table.jpg (2021-4-3 03:58, 130.18 KB) / 下载次数 18808
http://forums.xgecu.com/attachment.php?aid=340&k=e391627b1aaebb352426be4f1e2f83bc&t=1773278199&sid=gIUGIg

图片附件: 74LS54 as 7454.jpg (2021-4-3 03:58, 95.15 KB) / 下载次数 18534
http://forums.xgecu.com/attachment.php?aid=341&k=65b126bb0dfff2794540087fde0cbabd&t=1773278199&sid=gIUGIg

附件: sn7454.pdf (2021-4-3 03:58, 97.63 KB) / 下载次数 11666
http://forums.xgecu.com/attachment.php?aid=342&k=3f5c43227e9d7c533e3fcc947f53892c&t=1773278199&sid=gIUGIg

附件: 7454.lgc (2021-4-3 03:58, 2.36 KB) / 下载次数 74540
http://forums.xgecu.com/attachment.php?aid=343&k=00643feffecfd487993e97cc1ef5615a&t=1773278199&sid=gIUGIg

作者: yovish 时间: 2021-8-27 05:35

To check the logic vector for testing the 7454 integrated circuit, the test was performed on a real CEMI chip from Poland.

图片附件: 7454 (real) - Logic Test.jpg (2021-8-27 05:34, 286.75 KB) / 下载次数 19061
http://forums.xgecu.com/attachment.php?aid=910&k=a9fb399fb79a3282425a4981aba84ecb&t=1773278199&sid=gIUGIg

图片附件: UCY7454.jpg (2021-8-27 05:34, 493.85 KB) / 下载次数 20723
http://forums.xgecu.com/attachment.php?aid=911&k=feabeef03aaea48fd69e20283506126f&t=1773278199&sid=gIUGIg

附件: SN7454, SN74H54, SN74LS54.pdf (2021-8-27 05:34, 217.3 KB) / 下载次数 11981
http://forums.xgecu.com/attachment.php?aid=912&k=463840b2a5b92c386bf6a7575eab3c6c&t=1773278199&sid=gIUGIg

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)