Board logo

标题: XGecu Pro 不能正常读写M24256E2Prom芯片 [打印本页]

作者: diodes_1    时间: 2025-1-8 22:06     标题: XGecu Pro 不能正常读写M24256E2Prom芯片

如题,XGecu Pro在读取M24256时,总是提示过流或者芯片短路,芯片在希尔特500P上读写正常,没有问题。请咱们的技术人员把这个BUG解决了吧!
作者: Albano.Matos    时间: 2025-1-10 14:34

如题,XGecu Pro在读取M24256时,总是提示过流或者芯片短路,芯片在希尔特500P上读写正常,没有问题。请咱们 ...
diodes_1 发表于 2025-1-8 22:06



   Hello,            You have the possibility to adjust manually the 'VCC Current Imax:  ' in small increment steps.
If you have time, as you know the chip is good, change a bit the parameter, and post here the results,
please.
Rgds




欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/) Powered by Discuz! 7.2