XGecu Programmer Forums - Powered by Discuz! Board

标题: EMMC Error: BKOPS_EN[163]: 00000000 <-> 00000001 [打印本页]

作者: luzmina 时间: 2024-5-28 22:47 标题: EMMC Error: BKOPS_EN[163]: 00000000 <-> 00000001

What mean this error?
APP Version : 12.66 Model : T56  MFG:2022-03-06
   Device : H26M52208FPR_8Bit @BGA153
Pins Detected Passed!
Init EMMC... OK! ( OCR register: C0FF8080 )
Chip Temporary write Protect bit(TMP_WRITE_PROTECT) was cleared!
USER :Unprotect Temporary Write Protection Groups / Checked Total Groups : 0 / 3757
Erase User Area : Succeeded. Time : 0.547 S -- Erased Size :15388672 KB
Programming BOOT1 : Succeeded. Time : 0.531 S -- Partition Size :4096 KB Processing Size from the File : 4096 KB )
Programming BOOT2 : Succeeded. Time : 0.453 S -- Partition Size :4096 KB Processing Size from the File : 4096 KB )
Analysis file is complete, Space usage: 30.29% time: 84S
Programming User Area : Succeeded. Time : 404.109 S -- Partition Size :15388672 KB Processing Size from the File : 15388672 KB )
Programming  ECSD Succeeded. Time :  10 ms
Programming  CSD Succeeded. Time :  0 ms
Programming 32 bits CheckSum :  0x 20081601
Verify Restart EMMC ....
Init EMMC... OK! ( OCR register: C0FF8080 )
Verifying CSD Succeeded
Verifying  Error: BKOPS_EN[163]: 00000000 <-> 00000001
(OTP)WARNING: Verifying  Error: RST_n_FUNCTION[162]: 00000000 <-> 00000001
Verifying ECSD Failed
Programming Stopped!

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)