Board logo

标题: VGA_adpter DIY for T56 Programmer (VGA 适配器座) [打印本页]

作者: admin    时间: 2020-12-12 13:23     标题: VGA_adpter DIY for T56 Programmer (VGA 适配器座)


VGA_adapter.rar (560.46 KB)


VGA线:  最好使用15针全通线。
检查方法:PIN 4  9 10 11 12 15 必须有连通, 并且PIN4  9 11 12 15 不可以接地,

Note: Not to make a adapter by manually connection。
        HDMI signal working frequency up to 900mb / s,
       The HDMI can not work normally because of the different length of lines and the crossing of lines
The VGA head on PCB board is female.

用于串打打印与在线编程的VGA转USB 及 USB转耳机线,可以使用淘宝的的转接线。也可以按下图自制。多种线都能通用,软件能自动识别。
For serial printing and ISP on-line programming.
You can use  VGA to USB3.0/USB2.0 cable and VGA to headset cable  Sold on WEB.
It can also be made according to the following figure.
All kinds of lines can be recognized automatically by the software.

2020-12-12 16:26

附件: VGA_adapter.rar (2020-12-12 14:58, 560.46 KB) / 下载次数 909

图片附件: T56_VGA.jpg (2020-12-12 16:26, 64.6 KB) / 下载次数 232

作者: Test    时间: 2020-12-29 01:45

Possible link on
作者: Test    时间: 2021-1-11 17:52

回复 2# Test
作者: Test    时间: 2021-1-12 01:32

thank you very much

非常感谢你   :handshake

欢迎光临 XGecu Programmer Forums ( Powered by Discuz! 7.2