XGecu Programmer Forums - Powered by Discuz! Board

标题: T48 fails programming MX29F1610MC after update [打印本页]

作者: Snkfear 时间: 2023-11-3 04:32 标题: T48 fails programming MX29F1610MC after update

Hello! After updating to the last software (12.63) I can no longer program MX29F1610MC chips and I can't use an older version because it says isn't compatible.

APP Version : 12.63 Model : T48
   Device : MX29F1610MC @PSOP44

Adapter:  ADP_S44_EX-1  ......OK

Pins Detected Passed!

ID: 0x00C2 00F1......OK!

Erase  ...Succeeded. Time : 0.031 S

Programming FLASH ...Succeeded. Time : 59047ms

Verifying FLASH ...

ERROR! FLASH Address:0x002E95 Buf_Val:0xFFFF IC_Val:0x38A8

Programming  ...Failed

作者: Snkfear 时间: 2023-11-8 22:40

Please @王鑫 take a look!

作者: open 时间: 2024-1-16 10:19

你的处理好了吗？我的发贴几天了都没答复;P

作者: Snkfear 时间: 2024-2-2 06:39

Responder 3# abierto

No han actualizado el software por lo que sigo teniendo el mismo problema.
Es una pena que no se preocupen por los errores que ellos mismos generan en sus productos...

作者: VirtuaVillain 时间: 2024-4-14 21:40

Hey, did this get fixed? Does it now work with the MX29F160MC? I need to do some va0 modding!

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)