XGecu Programmer Forums - Powered by Discuz! Board

标题: TL866II Rebooting [打印本页]

作者: Vladimir 时间: 2023-10-16 15:15 标题: TL866II Rebooting

Good afternoon. I have a problem with the TL866II programmer. When I try to program a microcontroller or test a logic chip using +5 volts then my programmer resets itself.
If I externally power the microcontroller or +3 volts for the logic chip, then everything goes well. The problem only occurs when using +5 volts.
Self-diagnosis shows OK.
I changed the USB cable, the problem remained.

图片附件: 131357.png (2023-10-16 15:14, 229.76 KB) / 下载次数 23953
http://forums.xgecu.com/attachment.php?aid=2028&k=ae476f78480304f77b82b2267e68ca8b&t=1794706973&sid=F0NCM0

图片附件: 131420.png (2023-10-16 15:14, 202.92 KB) / 下载次数 23713
http://forums.xgecu.com/attachment.php?aid=2029&k=1938f4a8653748deb30c261fa24c8a27&t=1794706973&sid=F0NCM0

图片附件: Снимок экрана 2023-10-12 131444.png (2023-10-16 15:14, 250.34 KB) / 下载次数 24394
http://forums.xgecu.com/attachment.php?aid=2030&k=971c2f3d1f6ba99b3fc4ad0022146101&t=1794706973&sid=F0NCM0

欢迎光临 XGecu Programmer Forums (http://forums.xgecu.com/)