adesto at45db321e write problem
APP Version : 12.35 Model : TL866II PlusDevice : AT45DB321E[Page528] @SOIC8
Note:
Must Connect a 100P Capacitor between Pin MISO and Gnd!!!
and Connect a 2.2uf Capacitor between Pin VCC and Gnd!!!
All right, i go to the steps. Step by step.
APP Version : 12.35 Model : TL866II Plus
Device : AT45DB321E[Page528] @SOIC8
Pins Detected Passed!
ID: 0x 1F 27 ......OK!
Erase ...Succeeded. Time : 40.576 S
Programming FLASH ...Succeeded. Time : 52525ms
Verifying FLASH ...
ERROR! FLASH Address:0x001EF0 Buf_Val:0xE6 IC_Val:0x06
Programming ...Failed
why does the programmer not write the chip? if I use another programmer other than xgecue, everything is written and there are no errors.
Help me!!! [b]回复 [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2530&ptid=800]1#[/url] [i]Dmitry[/i] [/b]
TL866II Must Connect a 100P Capacitor between Pin MISO and Gnd!!!
and Connect a 2.2uf Capacitor between Pin VCC and Gnd!!!
If possible, please use T48 programmer, which is quite stable without adding capacitance. Hi Admin, of course I connected these capacitors, 100pF between SI and ground, 2.2uF between Vcc and ground. Nothing changed. [b]回复 [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2574&ptid=800]3#[/url] [i]Dmitry[/i] [/b]
MISO is SO . Not SI. [quote]回复 Dmitry
MISO is SO . Not SI.
[size=2][color=#999999]admin 发表于 2022-11-15 11:11[/color] [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2582&ptid=800][img]http://forums.xgecu.com/images/common/back.gif[/img][/url][/size][/quote]
Forgive me for typing, of course, SO leg. Error has not changed Hi, I bought T56 and there are no such problems with it, I also found a problem with the definition of pages, tl866 did not give the correct definition of pages
页:
[1]