atmega problems
programmer problem with reading and writing eeprom chips atmega :'( [quote]programmer problem with reading and writing eeprom chips atmega[size=2][color=#999999]tomas37 发表于 2022-10-20 04:14[/color] [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2439&ptid=782][img]http://forums.xgecu.com/images/common/back.gif[/img][/url][/size][/quote]
As a user: Please tell which programmer you are using, which ATMEGA eeproms you need attention
to, if you have pictures from errors please also upload here. All information you can give,
may lower the time for a solution to the problem you are facing., hopefully. I am using TL866II Plus. The program does not correctly read the eeprom from the file. The program reads and writes Flash and config correctly, but not eeprom. This is how it started after updating from version 11.81 I also use the AVRDude programmer to flash atmega chips and I have no problems with it. AVRDude reads the flash and eeprom files correctly and the atmega flashed device works. And if I flash the atmega chip with flash and eeprom files with the XGPro program, then the device does not work correctly.
[attach]1485[/attach] I am flashing atmega8, atmega16 chips in tqfp package.
can you please give me firmware 11.81 and tell me how to roll back the programmer to this version!? [b]回复 [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2443&ptid=782]4#[/url] [i]tomas37[/i] [/b]
Device configuration item is not set! There is no configuration information in the saved file.
you must set correct Fuse low byte and fuse high byte . replaced the picture and
[attach]1487[/attach][attach]1488[/attach][attach]1489[/attach] here is an example eeprom file that AVRdude reads and flashes correctly, but XGecu does not.
[attach]1490[/attach] this is how it should be right
[attach]1491[/attach]
this is the same eeprom read from the chip flashed by avrdude and it works correctly! [quote]this is how it should be right
this is the same eeprom read from the chip flashed by avrdude and ...
[size=2][color=#999999]tomas37 发表于 2022-10-20 22:02[/color] [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2449&ptid=782][img]http://forums.xgecu.com/images/common/back.gif[/img][/url][/size][/quote]
Hello: You have done a big work showing the problem. I hope Admin fixes it in newer versions.
Previously you ask for software version 11.81. As i know, you can download any or almost all
old versions, if you know the old version already
[color=#0099cc]http://www.xgecu.com/MiniPro/xgproV1181_setup.rar[/color]
[color=#0099cc]
[/color]
[color=#0099cc]
[/color]
you [size=12px]can copy the link for latest and change to the version you need ( at least in local server) .[/size]
[size=12px]Hope it helps you[/size]
[size=12px]Hoppefully Admin find the problem soon, or give a tip to solve issue.[/size]
[size=12px]Rgds[/size] I can conclude that the program correctly reads the eeprom from the atmega chips, but the program cannot correctly read the eeprom from a file on the computer if it is not a .BIN file
thanks for 11.81 :handshake [quote]I can conclude that the program correctly reads the eeprom from the atmega chips, but the program ca ...
[size=2][color=#999999]tomas37 发表于 2022-10-20 22:41[/color] [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=2451&ptid=782][img]http://forums.xgecu.com/images/common/back.gif[/img][/url][/size][/quote]
Hello: Have you tried to open the EEP file , using 'INTEL HEX' mode?File Load options, choose the EEP file, in the file format (left) change to INTEL HEX, [size=12px]and press ok. [/size] yes, it worked!!! Thanks! :D
页:
[1]