Problem with programming am29f800bb
Hello. I have read correctly am29f800bb but when i make changes and want to program it into chip i'm getting always error on 1,56%. That chip is from mercedes ecu. Here is pic of error and 2 bins (original and modifed).Pic:
[img]https://zapodaj.net/images/255a1d4f3063d.png[/img]
Bins:
[url]https://www3.zippyshare.com/v/tKdev2Qf/file.html[/url]
What i'm doing wrong? Maybe you need erase it before programming. When i mark erase i got this same error and chip didn't erase at all but it should. [b]回复 [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=876&ptid=307]3#[/url] [i]riderss[/i] [/b]
I tested with AM29F800BT , all is normal.(BT and BB only boot is diffrent。use the same algorithm )
It can be confirmed that the software is correct.
[b][color=#ff0000]clear pins contacts carefully[/color][/b]！First Read ID is Normal ,if not . bad pins or adapter.
[attach]713[/attach] [quote]回复 riderss
I tested with AM29F800BT , all is normal.(BT and BB only boot is diffrent。use the ...
[size=2][color=#999999]admin 发表于 2021-6-26 10:11[/color] [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=877&ptid=307][img]http://forums.xgecu.com/images/common/back.gif[/img][/url][/size][/quote]
My chip is AM29F800BB-55SE but i must uncheck "Check ID" to read chip but when i uncheck it its reads ok but i can't flash it back with changes. Got error on programming and i cant erase. Xgpro says erase is completed but chip isn't erased when i read it again.[code]**************************************************************
APP Version : 11.00 Model : TL866II Plus
Device : AM29F800BB @SOP44
**************************************************************
Pins Detected Passed!
Check ID Error!
Checked ID is:0x02FA 35C4
Wish to continue programming , please cancel [Check device ID] option!
[/code] I have tested BT too and chip flashed ok but still have problem with flashing BB.
页:
[1]