XGecu Programmer Forums » 编程器使用与软件下载 » VGA_adpter DIY for T56 Programmer (VGA 适配器座)

admin 发表于 2020-12-12 13:23

VGA_adpter DIY for T56 Programmer (VGA 适配器座)

PCB:

[attach]208[/attach]

[size=14px]注意：HDMI部分线路不可以手工连线制作适配器，HDMI信号工作频率达900MB/s,[/size]
[size=14px]      线路长短不同与线路交叉都无法使HDMI正常工作[/size]


[size=14px] [b]VGA线：  最好使用15针全通线。[/b][/size][size=14px][/size][size=14px][/size]
[size=14px][b]检查方法：PIN 4  9 10 11 12 15 必须有连通，[/b][/size][b] 并且PIN4  9 11 12 15 不可以接地，[/b]
[b]                PCB板上的VGA头为母头[/b]
[size=14px][b]HDMI线：可以使用通用的HDMI线[/b][/size]

[size=14px]Note: Not to make a adapter by manually connection。[/size]
[size=14px]        HDMI signal working frequency up to 900mb / s,[/size]
[size=14px]       The HDMI can not work normally because of the different length of lines and the crossing of lines[/size][size=14px]
[/size]The VGA head on PCB board is female.
[size=14px]
[/size]
[size=14px]用于串打打印与在线编程的VGA转USB　及　USB转耳机线，可以使用淘宝的的转接线。也可以按下图自制。多种线都能通用，软件能自动识别。[/size]
[size=14px]For serial printing and ISP on-line programming.[/size]
[size=14px]You can use  VGA to USB3.0/USB2.0 cable and VGA to headset cable  Sold on WEB.[/size]
[size=14px] It can also be made according to the following figure. [/size]
[size=14px]All kinds of lines can be recognized automatically by the software.[/size]

[size=14px][attach]209[/attach]
[/size]

Test 发表于 2020-12-29 01:45

[color=#000][font=Roboto, RobotoDraft, Helvetica, Arial, sans-serif][size=24px]Possible link on [/size][/font][/color][font=Roboto, RobotoDraft, Helvetica, Arial, sans-serif][color=#000000][size=24px]aliexpress.com[/size][/color][/font]

Test 发表于 2021-1-11 17:52

[b]回复 [url=http://forums.xgecu.com/redirect.php?goto=findpost&pid=473&ptid=133]2#[/url] [i]Test[/i] [/b]

[url=https://www.aliexpress.com/item/1005002019124624.html]https://www.aliexpress.com/item/1005002019124624.html[/url]

Test 发表于 2021-1-12 01:32

[color=#000][font=Roboto, RobotoDraft, Helvetica, Arial, sans-serif][size=24px]thank you very much[/size][/font][/color]

[color=#000][font=Roboto, RobotoDraft, Helvetica, Arial, sans-serif][size=24px]非常感谢你   :handshake [/size][/font][/color]

my_t56 发表于 2021-8-13 12:17

[url]https://www.aliexpress.com/item/1005002288505448.html[/url]欢迎选购!

Test 发表于 2022-9-18 09:10

如何閱讀和編程 WELTREND WT61P8**。 這是一個電源控制器，三星和LG電視使用QFP48。 是否支持此適配器?:::

https://ibb.co/QMNpJmd

qyh888888 发表于 2023-10-31 14:22

@admin 能不能给T48加上这个功能 大不了座子加密收费也行 测屏幕还是挺方便的

gobi2000 发表于 2024-1-13 01:17

How to used it's interface ?

查看完整版本: VGA_adpter DIY for T56 Programmer (VGA 适配器座)